Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the cam sprocket. 2. Use the ST to lock the cam sprocket, and install the cam sprocket bolt. Tightening torque: Tighten to a torque of 29.5 N·m (3.0 kgf-m, 21.8 ft-lb), and then tighten further by 45°.
• IN side
• EX side
3. Install the timing chain assembly. Timing Chain Assembly > INSTALLATION 4. Install the chain cover. Chain Cover > INSTALLATION 5. Install the crank pulley. Crank Pulley > INSTALLATION 6. Install the V-belts. V-belt > INSTALLATION |
Inspection
1. Check the cam sprocket teeth for abnormal wear and scratches.2. Make sure there is no free play between cam sprocket and key. ...
Camshaft
...
Other materials:
Manual seat (if equipped)
Forward and backward adjustment
Sit in the seat to adjust.
Pull the lever upward, slide the seat to
the desired position, and then release the
lever.
Try to move the seat back and forth to
make sure that it is securely locked into
place.
Reclining the seatback
...
