Subaru Legacy BN/BS (2015-2019) Service Manual: Camshaft

Installation

1. Install the cam sprocket.2. Use the ST to lock the cam sprocket, and install the cam sprocket bolt.Tightening torque:Tighten to a torque of 29.5 N·m (3.0 kgf-m, 21.8 ft-lb), and then tighten ...

Removal

1. Remove the engine from vehicle. Engine Assembly > REMOVAL2. Remove the crank pulley. Crank Pulley > REMOVAL3. Remove the chain cover. Chain Cover > REMOVAL4. Remove the timing chain assembly. T ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle, and then remove the rear wheels.3. Remove the nut - axle.CAUTION:Do not loosen the nut - axle while the rear axle is loaded. Doing so may damage the hub unit COMPL.(1) Lift the crimped section of the nut - axle.(2) R ...