Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Wheel and tire system / Tire and wheel / Installation

1. Install the wheels to vehicle.

2. Tighten the wheel nuts to the specified torque.

Tightening torque:

120 N·m (12.2 kgf-m, 88.5 ft-lb)

Inspection

1. TIRECAUTION:When replacing a tire, make sure to use tires of the same size, construction and load range as originally installed.1. Tire size and tire inflation pressure check General Description > ...

Tire pressure monitoring system

...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the center exhaust pipe. Center Exhaust Pipe > REMOVAL4. Remove the center exhaust cover.5. Remove the clamp cable and take out the MT gear shift cable from the clamp.(A)Clamp cable6. Remove the dust cover. ...