Subaru Legacy BN/BS (2015-2019) Service Manual: Tire pressure monitoring system

Installation

1. Install the wheels to vehicle.2. Tighten the wheel nuts to the specified torque.Tightening torque:120 N·m (12.2 kgf-m, 88.5 ft-lb) ...

Removal

1. TRANSMITTER (TIRE INFLATION PRESSURE SENSOR)1. Remove the wheels from the vehicle. Tire and Wheel > REMOVAL2. Remove the tires from wheels.CAUTION:Use a tire changer when removing the tire from th ...

Other materials:

Assembly
NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface of rear cover and rectifier and apply new silicone grease.CAUTION:Do not apply silicone grease to the ...