Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Wheel and tire system / Tire pressure monitoring system / Adjustment

Re-register the transmitter ID when transmitter has been replaced. Register Transmitter (ID)

Removal

1. TRANSMITTER (TIRE INFLATION PRESSURE SENSOR)1. Remove the wheels from the vehicle. Tire and Wheel > REMOVAL2. Remove the tires from wheels.CAUTION:Use a tire changer when removing the tire from th ...

Installation

1. TRANSMITTER (TIRE INFLATION PRESSURE SENSOR)CAUTION:Use the new transmitter assembly or replace the new valve and screw, when installing.1. Replace the valve and screw with a new part when reusing ...

Other materials:

Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL3. Remove the bulb socket and back-up light bulb.CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.2. OUTBACK MODE ...