Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
CAUTION: • Be careful not to damage the sensor. • Do not apply excessive force to the sensor harness. 1. Install the front ABS wheel speed sensor. Tightening torque: Front ABS wheel speed sensor: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the front wheels. Tightening torque: Front wheel: 120 N·m (12.2 kgf-m, 88.5 ft-lb) 3. Lower the vehicle. NOTE: Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering. 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. CHECK WITH SUBARU SELECT MONITOR1. Connect the Subaru Select Monitor to data link connector.NOTE:For detailed operation procedures, refer to “Application help”.(1) On «Start» display, ...
Other materials:
Dtc p0102 mass or volume air flow sensor "a" circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Engine stalls.• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PRO ...
