Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) / Rear magnetic encoder / Installation

Refer to “Rear Hub Unit Bearing” for installation, because the rear magnetic encoder is integrated with the hub unit COMPL - rear axle. Rear Hub Unit Bearing > INSTALLATION

Inspection

Visually check the magnetic encoder parts for any damage. If necessary, replace with a new hub unit COMPL - rear axle.NOTE:Because the magnetic encoder is integrated with hub unit COMPL, replace the h ...

Relay and fuse

...

Other materials:

Installation
1. Install the 1st-2nd fork rod to the 1st-2nd shifter fork through the hole on the rear of the transmission case.2. Align the holes on the 1st-2nd fork rod and 1st-2nd shifter fork, and drive the straight pin into these holes using the ST to fix.NOTE:Use a new straight pin.ST 398791700REMOVER(A) ...