Subaru Legacy BN/BS (2015-2019) Service Manual: Rear magnetic encoder

Installation

CAUTION:• Be careful not to damage the sensor.• Do not apply excessive force to the sensor harness.1. Install the rear ABS wheel speed sensor.NOTE:Check the identification (mark) on the ha ...

Removal

Refer to “Rear Hub Unit Bearing” for removal, because the rear magnetic encoder is integrated with the hub unit COMPL - rear axle. Rear Hub Unit Bearing > REMOVAL ...

Other materials:

Adjustment
1. Remove the spring retainers and reduction drive gear shims.2. Install the transmission case, and secure it with four or five bolts.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)3. Measure depth “A” from the ST upper face to the reduction drive gear end face.ST 499575400GAU ...