Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) / Vdc off switch / Installation

1. Install the VDC OFF switch.

2. Install the cover assembly - instrument panel LWR driver.

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 8Switch OFF1 M- or moreSwitch ONLess than 1 -2. Apply battery voltag ...

Vdc sequence control

...

Other materials:

Installation
1. Install the engine coolant temperature sensor, and connect the connector to the engine coolant temperature sensor.NOTE:Use a new gasket.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)2. Connect the ground terminal to battery sensor. NOTE3. Fill engine coolant. Engine Coolant > REPLACEME ...