Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the air intake boot, and connect the PCV hose. 2. Tighten the clamp (C) securing the throttle body to the air intake boot. Tightening torque: 3 N·m (0.3 kgf-m, 2.2 ft-lb) 3. Tighten the clamp (B) securing the air cleaner case (rear) to the air intake boot. Tightening torque: 3 N·m (0.3 kgf-m, 2.2 ft-lb) 4. Install the clip (A) to the air intake boot.
|
Inspection
1. Check that the air intake boot has no deformation, cracks or other damages.2. Inspect that no foreign objects are mixed in the air intake boot. ...
Air intake duct
...
Other materials:
Removal
1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL3. Remove the garnish - trunk. Trunk Lid Garnish > REMOVAL4. Remove the rear finisher light assembly.(1) Disconnect the connector.(2) Remove the nuts and release ...
© 2017-2026 Copyright www.sulegacy.com
