Subaru Legacy BN/BS (2015-2019) Service Manual: Air intake duct

Installation

1. Install the air intake boot, and connect the PCV hose.2. Tighten the clamp (C) securing the throttle body to the air intake boot.Tightening torque:3 N·m (0.3 kgf-m, 2.2 ft-lb)3. Tighten the ...

Removal

Remove the clip which secures the air intake duct, and remove the air intake duct. ...

Other materials:

Removal
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of front wheel speed sensor. If adhesion occurs, replace with a new part.• When removing front wheel speed sensor, CVTF may let out. If CVTF has leaked, adjust the CVTF level after installing the front wheel ...