Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Starting charging systems(h4do) / Starter relay / Installation

1. Install the starter relay to the relay block.

2. Install the instrument panel lower cover. Instrument Panel Lower Cover > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check that the starter relay does not have deformation, cracks and any other damage.2. Measure the resistance between starter relay terminals.Terminal No.Standard1 and 21 M- or more3 and 4128.07 � ...

Starting charging systems(h6do)

...

Other materials:

Inspection
1. Moving the front tire up and down by hand, check there is no play in bearing, and check the wheel rotates smoothly.CAUTION:If there is any fault in the bearing, replace the hub unit COMPL.2. Inspect axial play of the hub unit bearing.(1) Remove the tire and disc rotor.(2) Inspect the lean of axis ...