Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Wiper and washer systems / Front washer nozzle / Installation

CAUTION:

Before installing the windshield glass and cowl panel, make sure there are no gravel in the installing area.

1. Install the nozzle - windshield washer.

(1) Install the nozzle - windshield washer.

(2) Install the hose - windshield washer.

2. Install the cowl panel - side and the cowl panel assembly. Cowl Panel > INSTALLATION

3. Install the arm assembly - windshield wiper. Front Wiper Arm > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

5. Adjust the position of the nozzle - windshield washer. Front Washer Nozzle > ADJUSTMENT

Adjustment

1. NOZZLE - WINDSHIELD WASHER1. Turn the wiper switch to OFF position.2. While the vehicle is at a standstill, insert the washer nozzle adjustment tool (a) into upper side (b) and lower side (c) of th ...

Inspection

• Make sure the nozzle - windshield washer and the hose - windshield washer are not clogged.• Make sure the hose - windshield washer is not bent.• Check the position of the nozzle - ...

Other materials:

Dtc p0108 manifold absolute pressure/barometric pressure sensor circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON ST ...