Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Glass windows mirrors / Outer mirror assembly / Installation

CAUTION:

Be careful not to catch the harness in between the parts.

1. Install the outer mirror assembly.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Install the sealing cover - front door.

3. Install the trim panel - front door. Door Trim > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

Assembly

CAUTION:Be careful not to catch the harness in between the parts.1. Install the light assembly - side turn mirror.2. Install the cover - cap outer mirror.3. Install the cover - cap outer mirror lower. ...

Inspection

1. CHECK OPERATION1. Check the mirror operation when battery voltage is applied between the connector terminals.Terminal No.Inspection conditionsSwitch position — — OFF4 (+) — 3 (−)Apply ...

Other materials:

Inspection
1. CHECK ACCELERATOR PEDAL SENSOR AREA (METHOD WITH CIRCUIT TESTER)1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the ECM. Engine Control Module (ECM) > REMOVAL Engine Control Module (ECM) > REMOVAL3. Install the ST between the ECM and bulkhead harness and the engine harness ...