Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Before installation, inspect the following items and replace any faulty part with a new part. • Control module is deformed. • Control module connector is damaged. • Control module mounting bracket is damaged. 2. Install the airbag control module. CAUTION: Do not reuse the bolt and nut. Always replace with the specified new bolts and nuts. Tightening torque: 25 N·m (2.5 kgf-m, 18.4 ft-lb) 3. Install the cover - shift lever and the console box assembly. Tightening torque: 6.5 N·m (0.7 kgf-m, 4.8 ft-lb) 4. Connect the ground terminal to battery sensor. NOTE |
Removal
CAUTION:• Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION• Do not disassemble the airbag co ...
Other materials:
Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Drain approximately 3.0 L (3.2 US qt, 2. ...
