Subaru Legacy BN/BS (2015-2019) Owners Manual: Keyless access with push-button start system (if equipped)

Subaru Legacy BN/BS (2015-2019) Owners Manual / Keys and doors / Keyless access with push-button start system (if equipped)

The keyless access with push-button start system allows you to perform the following functions when you are carrying the access key.

Locking and unlocking of the doors and rear gate (Outback)
Opening the trunk (Legacy)
Starting and stopping the engine. For detailed information, refer to "Starting and stopping engine (models with push-button start system)" .
Arming and disarming the alarm system.
For detailed information, refer to "Alarm system" .

Locking and unlocking by the remote keyless entry system can also be controlled with the buttons on the access key.

For detailed information, refer to "Remote keyless entry system" .

Power door locking switches

Lock Unlock All doors and the rear gate (Outback) can be locked and unlocked by the power door locking switches located at the driver's side and the front passenger's side doors. ...

Access key

Access key (main) Access key (sub) Key number plate The vehicle has two access keys and a key number plate. For details about the key number plate, refer to "Key number plat ...

Other materials:

Preparation for overhaul procedure
1. After removing the engine from the vehicle body, attach the ST to the engine as shown in the figure.NOTE:When using a commercially sold engine stand, follow the instructions of engine stand used.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)ST1 498457000ENGINE STAND ADAPTER RHST2 4 ...