Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Power door locking switches

Power door locking switches

  1. Lock
  2.  Unlock

All doors and the rear gate (Outback) can be locked and unlocked by the power door locking switches located at the driver's side and the front passenger's side doors.

To lock the doors, press the front side of the switch.

To unlock the doors, press the rear side of the switch.

When you close the doors after you set the door locks, the doors remain locked.

NOTE Make sure that you do not leave the key inside the vehicle before locking the doors from the outside using the power door locking switches.

Key lock-in prevention function

This function prevents the doors from being locked under the following conditions.

  •  The key is still in the ignition switch (models without "keyless access with push-button start system")
  •  The ignition switch is in the "ON" position (models with "keyless access with push-button start system")

This function's operational/non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details.


  •  The factory setting (default setting) for this function is set as "operational".
  •  When leaving the vehicle, make sure you are holding the key before locking the doors.

Behavior with key lock-in prevention function operational

With the driver's door open, the doors are automatically kept unlocked even if the front side of the power door locking switch is pressed.

Behavior with key lock-in prevention function non-operational

  •  If the lock lever is turned to the rear ("LOCK") position with the driver's door open and the driver's door is then closed with the lock lever in that position, the driver's door is locked.
  •  If the spare key is used to lock the driver's door from the outside of the vehicle, the door is locked.
Battery drainage prevention function
If a door or the rear gate (Outback) is not completely closed, the interior lights will remain illuminated as a result. However, several lights are automatically turned off by the battery drainage ...

Keyless access with push-button start system (if equipped)
The keyless access with push-button start system allows you to perform the following functions when you are carrying the access key.  Locking and unlocking of the doors and rear gate (Ou ...

Other materials:

1. Using the ST, screw-in the retainer until resistance is felt.NOTE:RH side should be screwed-in more than LH side.ST 18658AA020WRENCH COMPL RETAINER2. Remove the remaining liquid gasket from the mating surface completely.3. Using the ST, install the drive pinion assembly to converter case.ST ...

© 2017-2024 Copyright