Subaru Legacy BN/BS (2015-2019) Service Manual: Knock sensor

Disassembly

1. Remove the fuel injector pipe and the fuel hose, and remove the fuel pipe assembly.2. Remove the engine harness. General Description > COMPONENT3. Remove the EGR control valve. EGR Control Valve ...

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Disassembly
CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.1. TAIL LIGHT/STOP LIGHT BULBNOTE:Since the LED type is a non-disassembled part, it cannot be removed.2. TURN SIGNAL LIGHT BULBRotate the bulb socket in the direction of arrow shown in the figure to rem ...