Subaru Legacy BN/BS (2015-2019) Owners Manual: License plate light

Outback

Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim. Turn the bulb socket counterclockwise and remov ...

Legacy

NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. Open the trunk. Remove the trunk trim lining by remov ...

Other materials:

Installation
CAUTION:If the steering wheel and steering angle sensor are removed, perform “VDC sensor midpoint setting mode” of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT1. Before attaching a new roll connector, apply a thin coat of grease contained in the connec ...