For procedure of each component in the power rear gate system, refer to the respective section. • Power rear gate control module (PRG CM): Power Rear Gate Control Module • Power rear gate drive unit (PRG D/U): Power Rear Gate Drive Unit • Power rear gate rod: Power Rear Gate Rod • Power rear gate auto closer: Power Rear Gate Auto Closer • Power rear gate touch sensor: Power Rear Gate Touch Sensor • Power rear gate buzzer: Power Rear Gate Buzzer • Power rear gate inner switch: Power Rear Gate Inner Switch • Power rear gate driver’s switch: Power Rear Gate Driver’s Switch • Memory height switch: Memory Height Switch • Power rear gate opener button (PRG): Rear Gate Opener Button • Body integrated unit: Body Integrated Unit |
Disassembly
NOTE:When replacing the coupling sleeve and synchronizer hub, replace them as a set. Because these must engage at the specified point, avoid disassembly as much as possible. If it is necessary to disassemble, mark the engaging points on the splines beforehand.1. Put vinyl tape around the main shaft ...