Subaru Legacy BN/BS (2015-2019) Service Manual: Operation
NOTE: For detailed operation procedures, refer to “Application help”. 1. ECM For current data of ECM, refer to ENGINE (DIAGNOSTICS). Subaru Select Monitor 2. BODY INTEGRATED UNIT NOTE: Except for C0 and C5 models Refer to the BODY CONTROL SYSTEM (DIAGNOSTICS) for the current data of the body integrated unit. Read Current Data 3. IMMOBILIZER CM NOTE: For C0 and C5 models 1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Immobilizer» and then select «Enter». 5. On «Immobilizer» display, select «Data Monitor». |
List
1. ECMFor current data of ECM, refer to ENGINE (DIAGNOSTICS). Subaru Select Monitor2. BODY INTEGRATED UNITNOTE:Except for C0 and C5 modelsRefer to the BODY CONTROL SYSTEM (DIAGNOSTICS) for the curren ...
Other materials:
Installation
CAUTION:If the steering wheel and steering angle sensor are removed, perform “VDC sensor midpoint setting mode” of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT1. Before attaching a new roll connector, apply a thin coat of grease contained in the connec ...
