Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Occupant detection system (diagnostics) / Read current data / Operation

Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.

NOTE:

For detailed operation procedures, refer to “Application help”.

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Occupant Detection».

5. On «Occupant Detection» display, select «Data Monitor».

List

ItemDisplayNoteTrip Count — General Description > CAUTIONCount — Time Count [msec] — Belt Buckle Switch LHUnbelted/Belted/Other“Belted” when the left side seat belt is fastened&ldqu ...

Other materials:

Installation
1. Apply liquid gasket to the mating surface of cylinder block shown in the figure.NOTE:• Install within 5 min. after applying liquid gasket.• Do not apply liquid gasket excessively. If too much is applied, remove any liquid gasket that is squeezed out.Liquid gasket:THREE BOND 1217G (K08 ...