Subaru Legacy BN/BS (2015-2019) Service Manual: Operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Power Seat Memory» and then select «Enter». 5. On «Select Function» display, select «DTC». 6. On «DTC» display, select «FFD». NOTE: For detailed operation procedures, refer to “Application help”. |
List
DisplayContentNoteBattery Terminal VoltageBattery voltage is displayed. — Slide OutputPower seat control module output status is displayed. (Slide motor) — Reclining OutputPower seat control modul ...
Other materials:
Inspection mode operation
DTC can be diagnosed by executing the Inspection Mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. Perform the Clear Memory Mode. Clear Memory Mode2. Read the DTC and check that the DTC is not displaye ...
