Subaru Legacy BN/BS (2015-2019) Service Manual: Operation
Disabling/Activating the keyless access system The following functions are disabled when the keyless access system functions are disabled: • LOCK function performed by the operation of touch sensor on the door outer handle • UNLOCK function by the door touch sensor • Trunk lid open function by trunk opener button operation in the trunk lid lock condition • Lockout prevention feature • Warning function • Engine starting control using keyless access collation |
Procedure
1. STOPPING KEYLESS ACCESS SYSTEM FUNCTION BY DOOR OPEN/CLOSE PROCEDURE1. Check that the vehicle status is as follows:• Ignition switch OFF• One window is completely open• Keyless ac ...
Other materials:
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL3. Remove the bolts, and then remove the panel - knee guard.4. Remove the motor - actuator mode.(1) Disconnect the connector.(2) Remove the s ...
