Subaru Legacy BN/BS (2015-2019) Service Manual: Security and locks
Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks
- Diagnostics with phenomenon inspection
- Id code box note
- Immobilizer control module note
- Access buzzer
- Access key
- Body integrated unit
- Door lock control system
- Front door latch and door lock actuator assembly
- Front hood lock assembly
- Front inner remote
- Front outer handle
- Function setting (customize)
- General description
- Ignition key lock
- Immobilizer antenna
- Impact sensor
- Key lock cylinders
- Keyless access cm
- Keyless access indoor antenna
- Keyless access outdoor antenna
- Keyless access with push button start system
- Keyless buzzer
- Keyless entry control module
- Keyless entry system
- Keyless transmitter
- Push button ignition switch
- Rear door latch and door lock actuator assembly
- Rear gate latch and actuator assembly
- Rear gate opener button
- Rear inner remote
- Rear lock button
- Rear outer handle
- Relay and fuse
- Remote openers
- Security system
- Steering lock cm
- Trunk lid latch and actuator assembly
- Trunk opener button
- Trunk opener switch
Inspection
CAUTION:• Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION• When inspecting the airbag main ...
Diagnostics with phenomenon inspection
Refer to “Diagnostics with Phenomenon” of “KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)” section. Diagnostics with Phenomenon ...
Other materials:
Installation
1. Install the fuel injector to the fuel pipe.NOTE:Use new O-rings and rubbers.2. Install the fuel injector and fuel pipe as a unit, and install the bolt securing the fuel pipe to the cam carrier.NOTE:Use new seal rings.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)3. Connect the fuel deliv ...
© 2017-2025 Copyright www.sulegacy.com
