Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Keyless access cm / Installation

NOTE:

Make sure that there are no differences from the contents of the current settings after installation. Read Current Data > LIST

1. Install the reinforcement - combination meter and keyless access CM.

NOTE:

For model with navigation, install the GPS antenna assembly. GPS Antenna > INSTALLATION

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

2. Install the combination meter assembly. Combination Meter > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the combination meter assembly. Combination Meter > REMOVAL3. Remove the keyless access CM.(1) Remove the reinforcement - combina ...

Keyless access indoor antenna

...

Other materials:

Installation
1. Clean the mating surfaces of the transmission case, transfer case and extension case.2. Apply a coat of grease to the taper roller bearing (transfer case side) of transfer driven gear and the roller rolling surface of the taper roller bearing (extension case side).Grease:NICHIMOLY N-130 or equiva ...