Subaru Legacy BN/BS (2015-2019) Service Manual: Rear lock button

Installation

1. Before installation, check the following items.• Cable is free from deformation such as fray.• Grease is applied sufficiently to cable joints.If grease is insufficient, add it as necess ...

Removal

NOTE:• The rear lock button is integrated with the switch - opener rear gate.• Open the panel - rear gate before disconnecting the ground terminal from battery sensor.1. Disconnect the gro ...

Other materials:

Installation
CAUTION:• If the airbag has been activated, replace the front sub sensor with a new part.• Do not reuse the bolt and nut.Always replace with the specified new bolts and nuts.• When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body sid ...