Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Rear inner remote / Inspection

Check if the remote handle operates normally.

• If the lever is faulty, replace the remote handle.

• If the cable is deformed, replace the latch & actuator assembly - rear.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - rear door. Door Trim > REMOVAL3. Remove the screw, and remove the remote assembly - door. ...

Installation

1. Before installation, check the following items.• Cable is free from deformation such as fray.• Grease is applied sufficiently to cable joints.If grease is insufficient, add it as necess ...

Other materials:

Dtc c1935 ignition switch circuit
DTC DETECTING CONDITION:A fault is detected after a predetermined period of time, if the hardware IGN signal and CAN IGN signal were compared and did not match.TROUBLE SYMPTOM:Brake warning light illuminates.WIRING DIAGRAM:Parking brake / brake fluid level warning light system Parking Brake / Brake ...