Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Parking brake / Parking brake switch / Inspection

1. SWITCH ASSY - ELECTRONIC PARKING BRAKE

Check the resistance between connector terminals.

Switch position	Terminal No.	Standard
Press (Release)	6 and 2 6 and 5	Less than 1 -
Neutral	6 and 1 2 and 5	Less than 1 -
Pull (Lock)	6 and 1 6 and 2	Less than 1 -

NOTE:

Replace the switch if the inspection result is not within the standard value.

Removal

1. Disconnect the ground terminal from battery sensor. NOTENOTE:For CVT models, set the select lever to the “N” position before disconnecting the battery.2. Remove the cover assembly - fr ...

Installation

1. Install the switch assembly - electronic parking brake.2. Install the cover assembly - front. Console Box > INSTALLATION3. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Read cancel code operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select «Subaru Rear Vehicle Detection(RH)» or «Subaru Rear Vehicle ...