Subaru Legacy BN/BS (2015-2019) Service Manual: Front inner remote

Inspection

Check if the lock assembly operates normally.If lever deformation, abnormal wear, or unsmooth lock operation is observed, replace the lock assembly - front hood. ...

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the screw, a ...

Other materials:

Installation
1. Select shims for pulley alignment. Primary Pulley and Secondary Pulley > ADJUSTMENT2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the seal rings, do not expand the seal rings too much.• Apply CVTF to the seal rings.3. Install the seal ri ...