Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Keyless access indoor antenna / Installation

1. FRONT ANTENNA

1. Install the front antenna assembly - interior.

2. Install the console front duct.

3. Install the pocket assembly - CTR. External Connection Terminal > REMOVAL

4. Install the console box assembly.

5. Connect the ground terminal to battery sensor. NOTE

2. CENTER ANTENNA

1. Install the center antenna assembly - interior.

2. Install the rear seat cushion assembly. Rear Seat > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

3. REAR ANTENNA (SEDAN MODEL)

1. Install the rear antenna assembly - interior.

2. Install the mat - trunk.

3. Connect the ground terminal to battery sensor. NOTE

4. REAR ANTENNA (OUTBACK MODEL)

1. Install the rear antenna assembly - interior.

2. Install the spacer - rear floor front.

3. Install the spacer - rear floor side RH, spacer - rear floor side LH, and sub trunk assembly.

4. Install the mat - rear floor RH, mat - rear floor LH, and mat - rear floor CTR.

5. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATION2. Disconnect the Subaru Select Monitor. After placing the acces ...

Keyless access outdoor antenna

...

Other materials:

Disassembly
1. Remove the rear seat. Rear Seat > REMOVAL2. Remove the headrest assembly - rear.3. Remove the resin fasteners on the lower of the backrest assembly, and remove the clip.4. Release the clips to remove the lock cover. (OUTBACK model)5. Open the fastener and turn over the cover COMPL - rear backres ...