Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Rear outer handle / Inspection

Check if the outer handle operates normally.

If the lever is faulty, replace the handle - door outer.

Removal

1. Raise the glass assembly - rear door to the top position.2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the trim panel - rear door. Door Trim > REMOVAL4. Remove the sealing ...

Installation

1. Before installation, check the following items.• Lever is free from deformation.• Grease is applied sufficiently to lever joints.If grease is insufficient, add it as necessary before as ...

Other materials:

Dtc b1812 short in driver's airbag dual stage - 2nd step (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in main harness, shorted to ground in roll connector, shorted to ground in driver’s airbag, shorted to ground in airbag CM internal circuit)CAUTION:Before performing ...