Subaru Legacy BN/BS (2015-2019) Service Manual: Note
1. WHEN REPLACING THE BODY INTEGRATED UNIT 1. Check and record the current setting. Registration Body Integrated Unit > OPERATION CAUTION: • When the body integrated unit is replaced, registration of the immobilizer is required. For detailed operation procedure, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER”. (Models without the keyless access with push button start) • When replacing the body integrated unit, install the starter relay (a) to the relay holder.
NOTE: The fuse & relay box is a single unit with the body integrated unit. 2. AFTER REPLACING THE BODY INTEGRATED UNIT 1. Set the current settings as recorded. 2. Register the immobilizer. (Models without the keyless access with push button start, and except for C0 and C5 models) NOTE: For detailed operation procedure, refer to the “REGISTRATION MANUAL FOR IMMOBILIZER”. |
Installation
CAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION• ...
Other materials:
Dtc p0107 manifold absolute pressure/barometric pressure sensor circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE EZ (WITHOUT PUSH BUTTON ST ...
