Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Trunk opener switch / Installation

1. Install the switch - trunk opener.

2. Install the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard1 — 4Switch OFF1 M- or moreSwitch ONLess than 1 -2. Apply battery voltag ...

Speed control systems(h6do)

...

Other materials:

Installation
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• After installing the secondary pressure sensor, adjust the CVTF level.1. Install the secondary pressure sensor.NOTE:• Use new ...