Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. RH SIDE 1. Install the spark plugs using a spark plug socket. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 2. Install the ignition coil. CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt. Tightening torque: 8.0 N·m (0.8 kgf-m, 5.9 ft-lb) 3. Connect the connector to the ignition coil. 4. Install the air cleaner element and air cleaner case (rear). Air Cleaner Element > INSTALLATION 5. Connect the ground terminal to battery sensor. NOTE 2. LH SIDE 1. Install the spark plugs using a spark plug socket. Tightening torque: 18 N·m (1.8 kgf-m, 13.3 ft-lb) 2. Install the ignition coil. CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt. Tightening torque: 8.0 N·m (0.8 kgf-m, 5.9 ft-lb) 3. Connect the connector to the ignition coil. 4. Install the battery. Battery > INSTALLATION |
Inspection
1. Check the spark plug for abnormalities. If defective, replace the spark plug.(A)Terminal damage(B)Crack or damage in insulator(C)Damaged gasket2. Check the spark plug electrode and condition of the ...
Ignition(h6do)
...
Other materials:
Dtc p0890 tcm power relay sense circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Improper gear shiftingWIRING DIAGRAM:Power supply circuit Power Supply Circuit > WIRING DIAGRAMEngine electrical system Engine Electrical System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK ECM CONNECTOR.Check the connecting conditio ...
