Subaru Legacy BN/BS (2015-2019) Service Manual: Ignition(h4do)

Inspection

1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsStan ...

General description

...

Other materials:

Inspection mode operation
It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1DTCItemNoteU0073CAN FAILURE, BUS ‘OFF’ DETECTION ...