Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. CHECK FUSE

1. Remove the fuse and inspect visually.

2. If the fuse is blown out, replace the fuse.

2. CHECK RELAY

1. Measure the resistance between relay terminals.

Terminal No.

Inspection conditions

Standard

Circuit

1 — 2

Always

1 M- or more

1 — 2

Apply battery voltage between terminals 4 and 3.

Less than 1 -

2. Replace the relay if the inspection result is not within the standard value.

Location
Main fuse box (M/B)Horn relay(A)Fuse 7.5 A (horn assembly - Hi)(B)Fuse 7.5 A (horn assembly - Lo)(C)NOTE:For other related fuses, refer to the wiring diagram. Power Supply Circuit ...

Ignition(h4do)
...

Other materials:

Dtc p0112 intake air temperature sensor 1 circuit low bank 1
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM: ...

© 2017-2025 Copyright www.sulegacy.com