Subaru Legacy BN/BS (2015-2019) Service Manual: Trunk opener button

Installation

1. Install the lock assembly - trunk lid.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Connect the ground terminal to battery sensor. NOTE3. Install the trim panel - trunk lid. Trunk Roo ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the garnish - trunk. Trunk Lid Garnish > REMOVAL3. Release the locks at both ends of the trunk opener button by pushing them with ...

Other materials:

Disassembly
Using the ST or a hydraulic press, push out the bolt - hub (b) from the hub unit COMPL - rear axle (a).CAUTION:• Be careful not to hammer the bolts - hub. This may deform the hub unit COMPL.• Do not reuse the bolt - hub.NOTE:Since the hub unit COMPL - rear axle cannot be disassembled, on ...