Subaru Legacy BN/BS (2015-2019) Service Manual: Rear gate latch and actuator assembly
NOTE:Make sure the child safety lock works correctly after installation.1. Before installation, check the following items.• Cable is free from deformation.• Grease is applied sufficiently ...
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL3. Remove the latch and actuator - rear gate.(1) Disconnect the connector.(2) ...
Other materials:
Installation
1. Install the pedal assembly.Tightening torque:T: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the snap pin and clevis pin connecting the operating rod and brake pedal.CAUTION:Always use a new clevis pin.3. Connect the connector to the brake switch.4. Connect the connector to the clutch switch.5 ...