Subaru Legacy BN/BS (2015-2019) Service Manual: Operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Blind spot detection rear cross traffic alert (diagnostics) / Read current data / Operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Subaru Rear Vehicle Detection(RH)» or «Subaru Rear Vehicle Detection(LH)» and then select «Enter».

5. On «Select Function» display, select «Data Monitor».

NOTE:

For detailed operation procedures, refer to “Application help”.

List

• «Subaru Rear Vehicle Detection(LH)»DisplayContentReference valueNoteSRVD System fail flagCurrent failure status of BSD/RCTA system is displayed.• Normal• Fail — SRVD System HAL ...

Other materials:

Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel - front door. Door Trim > REMOVAL3. Remove the panel - power window main switch. Power Window Control Switch > REMOVAL4. Release the claws, and then remov ...