Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation for overhaul

Installation

1. Set the range select lever to the “N” range.2. Install the parking pawl shaft, return spring and parking pawl.NOTE:Make sure that the end of return spring sticks out of parking pawl as ...

General description

Before disassembling and assembling the transmission, follow the following procedures to prepare. ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B) from the air cleaner case (rear).4. Loosen the clamp (A) securing the ...