Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation for overhaul

Installation

1. Set the range select lever to the “N” range.2. Install the parking pawl shaft, return spring and parking pawl.NOTE:Make sure that the end of return spring sticks out of parking pawl as ...

General description

Before disassembling and assembling the transmission, follow the following procedures to prepare. ...

Other materials:

Installation
1. CYLINDER HEAD RH1. Clean the bolt holes in the cylinder block RH.CAUTION:To avoid erroneous tightening of the bolts, clean out the bolt holes sufficiently by blowing with compressed air to eliminate engine coolant etc.2. Apply liquid gasket to both sides of the cylinder head gasket RH as shown in ...