| 398477701 | HANDLE | • Used for installing the rear bearing race. • Used for installing the front bearing race. (T-type and VA1-type) |
| 398477702 | DRIFT | • Used for installing the front bearing race. (T-type) • Used for installing the rear bearing race. (VA1-type) • Used for installing side bearing race. (VA1-type) |
| 398217700 | ATTACHMENT SET | Stand for rear differential carrier disassembly and assembly. |
| 498447120 | INSTALLER | Used for installing the front oil seal. |
| 498427200 | FLANGE WRENCH | Used for stopping rotation of companion flange when removing and tightening self-lock nut. |
| 398467700 | DRIFT | Used for removing drive pinion shaft, pilot bearing and front bearing cone. (T-type and VA1-type) |
| 399780104 | WEIGHT | • Used for installing the front bearing cone and the companion flange. • Used for installing the pilot bearing. (T-type and VA1-type) |
| 899580100 | INSTALLER | Used for installing the front bearing cone and the pilot bearing. (T-type and VA1-type) |
| 899904100 | STRAIGHT PIN REMOVER | • Used for removing and installing the pinion mate shaft lock pin. (T-type) • Used for removing and installing the pinion mate shaft spring pin. (VA-type) |
| 498247001 | MAGNET BASE | • Used for measuring backlash between side gear and pinion, and hypoid gear. • Used together with DIAL GAUGE (498247100). |
| 498247100 | DIAL GAUGE | • Used for measuring backlash between side gear and pinion, and hypoid gear. • Used together with MAGNET BASE (498247001). |
| 398507704 | BLOCK | Used for adjusting pinion height and preload. (T-type and VA1-type) |
| 398177700 | INSTALLER | Used for installing the rear bearing cone. (T-type and VA2-type) |
| 398457700 | ATTACHMENT | Used for removing the side retainer. (T-type) |
| 398477703 | DRIFT 2 | Used for installing the rear bearing race. (T-type and VA2-type) |
| 398437700 | DRIFT | Used for installing the side oil seal. (T-type and VA2-type) |
| 398507702 | DUMMY SHAFT | Used for adjusting pinion height and preload. (T-type) |
| 398507703 | DUMMY COLLAR | Used for adjusting pinion height and preload. (T-type) |
| 398517700 | REPLACER | Used for removing rear bearing cone. (T-type and VA2-type) |
| 398487700 | DRIFT | Used for installing side bearing cone. (T-type and VA2-type) |
| 398507701 | DIFFERENTIAL CARRIER GAUGE | Used for adjusting pinion height. (T-type) |
| 398527700 | PULLER ASSY | • Used for removing front oil seal. • Used for removing the side bearing race. (T-type) |
| 398417700 | DRIFT | Used for installing side bearing race. (T-type and VA2-type) |
| 28099PA090 | OIL SEAL PROTECTOR | Used for installing the rear drive shaft to the rear differential. (For oil seal protection) |
| 28099PA100 | DRIVE SHAFT REMOVER | Used for removing the rear drive shaft from rear differential. (T-type) |
| 399703600 | PULLER ASSY | Used for removing companion flange. |
| 899874100 | INSTALLER | Used for installing the companion flange. |
| 498077000 | REMOVER | Used for removing the side bearing cone. (VA2-type) |
| 899864100 | REMOVER | Used for removing the side bearing cone. (VA2-type) |
| 499277200 | INSTALLER | Used for installing the front bearing race and front oil seal. (VA2-type) |
| 18758AA000 | PULLER | Used for removing the side bearing race. (VA2-type) |
| 18759AA000 | PULLER ASSY | Used for removing the side bearing cone. (T-type) |
| 18678AA000 | DUMMY SHAFT | Used for adjusting pinion height and preload. (VA2-type) |
| 18831AA010 | DIFFERENTIAL CARRIER GAUGE | Used for adjusting pinion height. (VA2-type) |
| 18630AA010 | WRENCH COMPL RETAINER | • Used for removing and installing the side retainer. (VA1-type and VA2-type) • WRENCH ASSY (499787000) can also be used. |
| 498175500 | INSTALLER | Used for installing the rear bearing cone. (VA1-type) |
| 498447100 | INSTALLER | Used for installing the side oil seal. (VA1-type) |
| 399520105 | SEAT | • Used for removing the side bearing cone. (VA1-type and VA2-type) • Used together with PULLER SET (899524100). (VA1-type) • Used together with REMOVER (899864100). (VA2-type) |
| 899524100 | PULLER SET | • Used for removing the side bearing cone. (VA1-type) • Used together with SEAT (399520105). (1) Puller (2) Cap |
| 498485400 | DRIFT | Used for installing side bearing cone. (VA1-type) |
| 498505501 | DIFFERENTIAL CARRIER GAUGE | Used for adjusting pinion height. (VA1-type) |
| 498447110 | DRIFT | Used for installing the front bearing race. (VA1-type) |
| 498447150 | DUMMY SHAFT | Used for adjusting pinion height and preload. (VA1-type) |
| 498515500 | REPLACER | Used for removing rear bearing cone. (VA1-type) |
| 499705404 | SEAT | • Used for removing the side bearing race. (VA1-type) • Used together with PULLER ASSY (499705401). |
| 499705401 | PULLER ASSY | • Used for removing the side bearing race. (VA1-type) • Used together with SEAT (499705404). |
| 18270KA020 | SOCKET (E20) | Used for removing and installing the hypoid driven gear. (VA1-type and VA2-type) |
| 41399FG001 | SPECIAL TOOL ASSY | • Used for removing and installing the rear differential mount bushing. • Use (1), (2), (5), (6), (7), (8) and (9) for removal. • Use (3), (4), (5), (6), (7), (8) and (9) for installation. (1) SPECIAL TOOL A (41399FG010) (2) SPECIAL TOOL C (41399FG031) (3) SPECIAL TOOL B (41399FG020) (4) SPECIAL TOOL D (41399FG041) (5) SPECIAL TOOL SLEEVE (41399FG050) (6) SPECIAL TOOL RING (41399FG061) (7) SPECIAL TOOL NUT (41399FG070) (8) SPECIAL TOOL BEARING (41399FG080) (9) SPECIAL TOOL SHAFT (41399FG091) |
| 41399FG010 | SPECIAL TOOL A | • Used for removing the rear differential mount bushing. • For combination of tools for removal, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG020 | SPECIAL TOOL B | • Used for installing the rear differential mount bushing. • For combination of tools for installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG031 | SPECIAL TOOL C | • Used for removing the rear differential mount bushing. • For combination of tools for removal, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG041 | SPECIAL TOOL D | • Used for installing the rear differential mount bushing. • For combination of tools for installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG050 | SPECIAL TOOL SLEEVE | • Used for removing and installing the rear differential mount bushing. • For combination of tools for removal and installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG061 | SPECIAL TOOL RING | • Used for removing and installing the rear differential mount bushing. • For combination of tools for removal and installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG070 | SPECIAL TOOL NUT | • Used for removing and installing the rear differential mount bushing. • For combination of tools for removal and installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG080 | SPECIAL TOOL BEARING | • Used for removing and installing the rear differential mount bushing. • For combination of tools for removal and installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399FG091 | SPECIAL TOOL SHAFT | • Used for removing and installing the rear differential mount bushing. • For combination of tools for removal and installation, refer to “SPECIAL TOOL ASSY (41399FG001)”. |
| 41399YC000 | SOCKET WRENCH (17) | Used for tightening the self-locking nut. (Except for OUTBACK) |
| — (Newly adopted tool) | SUBARU SELECT MONITOR 4 | Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”. |
Caution
Component