Subaru Legacy BN/BS (2015-2019) Service Manual: Primary pulley and secondary pulley

Procedure

1. Clean the transmission exterior.2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL3. Attach the ST on the transmission.ST 18632AA000STAND ASSY4. Remove the transmissio ...

Removal

NOTE:Always replace primary pulley and secondary pulley as an assembly because they are non-disassembled parts.1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > ...

Other materials:

Removal
1. Hold the rear gate to the fully open position.2. Disconnect the ground terminal from battery sensor. NOTE3. Release the claws and then remove the cap - rear quarter pillar UPR LH.4. Remove the rod - power rear gate.CAUTION:• Using a small flat tip screwdriver wrapped with protective tape, ...