Subaru Legacy BN/BS (2015-2019) Service Manual: Procedure

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Malfunction indicator light / Procedure

1. Activation of malfunction indicator light Malfunction Indicator Light > ACTIVATION OF MALFUNCTION INDICATOR LIGHT

↓

2. Malfunction indicator light does not come on Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT COME ON

↓

3. Malfunction indicator light does not go off Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT GO OFF

Malfunction indicator light does not go off

DIAGNOSIS:The malfunction indicator light circuit is shorted.TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or genera ...

Malfunction indicator light does not come on

TROUBLE SYMPTOM:When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.STEPCHECKYESNO1.CHECK DTC.Is DTC of LAN system displayed- Read Diagnostic Troubl ...

Other materials:

Assembly
1. Apply CVTF to the seal of reverse brake piston and install it to intermediate case.2. Install the return spring.3. Set the spring retainer and snap ring.(A)Snap ring(B)Spring retainer4. Set the ST1, ST2 and ST3 to intermediate case.ST1 18762AA001COMPRESSOR SPECIAL TOOLST2 18763AA000COMPRESS ...