Subaru Legacy BN/BS (2015-2019) Service Manual: Procedure

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h6do) / Malfunction indicator light / Procedure

1. Activation of malfunction indicator light Malfunction Indicator Light > ACTIVATION OF MALFUNCTION INDICATOR LIGHT

↓

2. Malfunction indicator light does not come on Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT COME ON

↓

3. Malfunction indicator light does not go off Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT GO OFF

↓

4. Malfunction indicator light does not blink Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT DOES NOT BLINK

↓

5. Malfunction indicator light remains blinking Malfunction Indicator Light > MALFUNCTION INDICATOR LIGHT REMAINS BLINKING

Malfunction indicator light remains blinking

DIAGNOSIS:The delivery (test) mode fuse circuit is short-circuited to ground.TROUBLE SYMPTOM:Malfunction indicator light blinks when delivery (test) mode fuse is not connected.WIRING DIAGRAM:• E ...

Malfunction indicator light does not blink

DIAGNOSIS:• The malfunction indicator light circuit is open or shorted.• The delivery (test) mode fuse circuit is open.TROUBLE SYMPTOM:Malfunction indicator light does not blink during Ins ...

Other materials:

To decrease the speed (by the "RES/SET" switch)
Press the "RES/SET" switch to the "SET" side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as the new set speed. When setting the displayed unit as "MPH": The set speed can be decreased ...