Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System Check».

4. On «Select System» display, select «Power Steering».

5. On «Select Function» display, select «DTC».

NOTE:

• For details concerning the DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)

• For detailed operation procedures, refer to “Application help”.

List of diagnostic trouble code (dtc) list

DTCItemContent of diagnosisNoteNoneWithout DTCNormal Subaru Select Monitor > INSPECTION«Assist limitation» is displayed in the current data «EPS operating condition».Assist limitation is performed ...

Control module i o signal

...

Other materials:

Installation
CAUTION:Be careful not to snag the harness.1. Install each connector and the drain tube - sunroof.Tightening torque:Connector holder: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb)Ground bolt: 13 N·m (1.3 kgf-m, 9.6 ft-lb)2. Install the cover side sill - front and the front cover - side sill.3. Instal ...