Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Power seat memory system (diagnostics) / Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Power Seat Memory» and then select «Enter».

5. On «Select Function» display, select «DTC».

NOTE:

• For detailed operation procedures, refer to “Application help”.

• For details concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). List of Diagnostic Trouble Code (DTC)

List of diagnostic trouble code (dtc) list

DTCItemReferenceB2600LIN COMMUNICATION Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B2600 LIN COMMUNICATIONB2601LIN CIRCUIT LOW Diagnostic Procedure with Diagnostic Trouble Code (DTC) ...

Control module i o signal

...

Other materials:

Dtc p0507 idle control system rpm - higher than expected
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Engine keeps running at higher speed than specified idle speed.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspe ...