Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Headlight / Foglight» and then select «Enter». 5. On «Select Function» display, select «DTC». NOTE: • For detailed operation procedures, refer to “Application help”. • For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC) |
List of diagnostic trouble code (dtc) list
DTCItemReferenceU0074CONTROL MODULE COMMUNICATION BUS "BODY-CAN" OFF Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0074 CONTROL MODULE COMMUNICATION BUS "BODY-CAN" OFFU0101LOST COMMUN ...
System operation check mode operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...
Other materials:
Dtc p1493 coil 1 egr "a" control circuit high
NOTE:For the diagnostic procedure, refer to DTC P1499. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0851 PARK/NEUTRAL SWITCH INPUT CIRCUIT LOW1. OUTLINE OF DIAGNOSISDetects open or short circuit of EGR.Judge as NG when the ECM output level differs from the actual terminal level.2. ...
