Subaru Legacy BN/BS (2015-2019) Service Manual: System operation check mode operation

Subaru Legacy BN/BS (2015-2019) Service Manual / Steering responsive fog lights (diagnostics) / System operation check mode operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Headlight / Foglight» and then select «Enter».

5. On «Select Function» display, select «Active Test».

6. On «Active Test» display, select «Fog Light Lighting Test».

NOTE:

For detailed operation procedures, refer to “Application help”.

System operation check mode item	Display	Note
Fog Light Lighting Test	LH	Left side fog light is illuminated.
Fog Light Lighting Test	RH	Right side fog light is illuminated.

Read diagnostic trouble code (dtc) operation

1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Control module i o signal

...

Other materials:

Procedure
CAUTION:• Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.• On completing the work in FWD, switch back in AWD.1. Shift the select lever to “P” range.2. Connect the Subaru Select Monitor to data link connector.3 ...